🌐 Español — Community translation View in English

Node Metrics

The node detail screen provides comprehensive telemetry and metrics for each node on your mesh.

Métricas de Dispositivo

Basic operating information reported by each node:

Métrico Descripción
Battery Level Current battery percentage
Tensión Battery voltage reading
Utilización del canal Percentage of airtime consumed
Airtime Transmission time used by this node
Tiempo encendido Time since last reboot

Device metrics are displayed as individual cards with trend sparklines showing battery level, voltage, channel utilization, airtime, and uptime over time.

💡 Tip: Tap any metric card to expand it into a full chart with historical data points. Pinch to zoom the time axis.

Métricas de Entorno

Environmental sensor data (requires compatible hardware):

Métrico Sensor Examples
Temperatura: BME280, BME680, SHT31
Humedad BME280, BME680, SHT31
Presión Barométrica BME280, BMP280
Resistencia del Gas BME680
IAQ (Air Quality) BME680

Environment metrics are charted over time for easy trend analysis — temperature, humidity, and pressure each get their own line chart with the measurement unit displayed on the Y axis.

💡 Tip: Environment metrics require a sensor connected to the remote node. Not all nodes report environmental data. See Telemetry & Sensors for a full list of supported sensors.

Signal Metrics

Radio signal quality information:

Métrico Descripción
SNR Signal-to-Noise Ratio (higher is better)
RSSI Received Signal Strength Indicator (closer to 0 is better)
Hop Count Number of mesh hops for last message

Signal Quality Reference

SNR Range Quality
> 10 dB Excellent
0 to 10 dB Bien
-10 to 0 dB Aceptable
< -10 dB Poor

Métricas de Energía

Power management telemetry (requires INA sensor or compatible hardware):

Métrico Descripción
Bus Voltage Supply voltage
Intensidad Power draw in milliamps
Consumo Calculated wattage

Traceroute

Traceroute shows the path a message takes through the mesh:

  1. From the node detail screen, tap Traceroute.
  2. The app sends a traceroute request to the target node.
  3. Results show each hop with SNR/RSSI values.

Reading Traceroute Results 

You → Node A (SNR: 8.5) → Node B (SNR: 5.2) → Target

Each hop represents a relay node that forwarded the message.

Registro de Posiciones

Historical position data for nodes that share their location:

  • GPS coordinates
  • Altitud
  • Speed (if moving)
  • Timestamp for each position report

Información de Vecinos

Shows which nodes a given node can directly hear, useful for understanding mesh topology.

Viewing Metrics

  1. Navigate to Nodes.
  2. Tap the node you want to inspect.
  3. Select the metric category from the detail tabs.

Node detail — local device

The position tab shows location data for nodes that share GPS:

Position inline content

⚠️ Note: Metrics are only available when they have been reported by the remote node. Metrics update at intervals configured on each node’s telemetry settings.