🌐 Български — Community translation View in English

Node Metrics

The node detail screen provides comprehensive telemetry and metrics for each node on your mesh.

Метрики на устройството

Basic operating information reported by each node:

Метрични Описание
Battery Level Current battery percentage
Напрежение Battery voltage reading
Използване на канала Percentage of airtime consumed
Airtime Transmission time used by this node
Време на работа Time since last reboot

Device metrics are displayed as individual cards with trend sparklines showing battery level, voltage, channel utilization, airtime, and uptime over time.

💡 Tip: Tap any metric card to expand it into a full chart with historical data points. Pinch to zoom the time axis.

Показатели на околната среда

Environmental sensor data (requires compatible hardware):

Метрични Sensor Examples
Температура BME280, BME680, SHT31
Влажност BME280, BME680, SHT31
Барометрично налягане BME280, BMP280
Gas Resistance BME680
IAQ (Air Quality) BME680

Environment metrics are charted over time for easy trend analysis — temperature, humidity, and pressure each get their own line chart with the measurement unit displayed on the Y axis.

💡 Tip: Environment metrics require a sensor connected to the remote node. Not all nodes report environmental data. See Telemetry & Sensors for a full list of supported sensors.

Signal Metrics

Radio signal quality information:

Метрични Описание
SNR Signal-to-Noise Ratio (higher is better)
RSSI Received Signal Strength Indicator (closer to 0 is better)
Hop Count Number of mesh hops for last message

Signal Quality Reference

SNR Range Quality
> 10 dB Excellent
0 to 10 dB Добър
-10 to 0 dB Задоволителен
< -10 dB Poor

Показатели на мощност

Power management telemetry (requires INA sensor or compatible hardware):

Метрични Описание
Bus Voltage Supply voltage
Текущ Power draw in milliamps
Захранване Calculated wattage

Трасиране на маршрут

Traceroute shows the path a message takes through the mesh:

  1. From the node detail screen, tap Traceroute.
  2. The app sends a traceroute request to the target node.
  3. Results show each hop with SNR/RSSI values.

Reading Traceroute Results 

You → Node A (SNR: 8.5) → Node B (SNR: 5.2) → Target

Each hop represents a relay node that forwarded the message.

Журнал на позициите

Historical position data for nodes that share their location:

  • GPS coordinates
  • Надморска височина
  • Speed (if moving)
  • Timestamp for each position report

Neighbor Info

Shows which nodes a given node can directly hear, useful for understanding mesh topology.

Viewing Metrics

  1. Navigate to Nodes.
  2. Tap the node you want to inspect.
  3. Select the metric category from the detail tabs.

Node detail — local device

The position tab shows location data for nodes that share GPS:

Position inline content

⚠️ Note: Metrics are only available when they have been reported by the remote node. Metrics update at intervals configured on each node’s telemetry settings.