地圖與航點

地圖畫面顯示 mesh 網路上各節點的地理位置，以及已分享的航點。

地圖檢視

地圖顯示以下內容：

節點位置 — 每個回報位置的節點以彩色標記顯示
航點 — 已分享的興趣點
您的位置 — 您目前的 GPS 定位

節點標記

Each node that reports a position is shown as a node chip marker displaying the node’s short name. The chip is colored by the node’s own identity color (a stable color derived from its node number) — the same chip used in the node list, so a node looks the same everywhere. Marker color does not encode online/offline status. When a node’s position updates live, its marker briefly pulses. Nearby markers are clustered as you zoom out.

地圖控制項

縮放 — 雙指縮放或使用 +/- 按鈕
平移 — 拖曳以瀏覽地圖
置中 — 點選位置按鈕，使地圖以您的位置為中心
點選節點 — 點選節點標記以檢視詳細資訊

浮動工具列提供快速存取羅盤、圖層切換、節點篩選、重新整理及位置追蹤等功能。點選羅盤可重新對齊正北方向，或點選位置按鈕使地圖以您目前位置為中心。

Map controls overlay

航點

航點是可分享的地理興趣點，mesh 網路上的所有成員均可看見。

建立航點

在地圖上的目標位置長按。
輸入名稱及選填的說明。
為航點選擇圖示或表情符號。
點選「傳送」以分享至 mesh 網路。

Waypoints are addressed like messages: by default they broadcast on the primary channel, but a waypoint can also be sent on a specific channel or as a direct message to a single node.

航點屬性

屬性	描述說明
名稱	Short identifier (max 29 characters)
描述說明	選填的較長說明
圖示	地圖上的視覺標記表情符號
鎖定	若已鎖定，僅建立者可編輯或刪除
到期時間	Optional auto-remove date and time
Geofence	Optional enter/exit alert area — see below

航點到期設定

航點可設定為自動到期：

永不到期（預設）— 航點將保留至手動刪除為止
Timed — pick a specific date and time; the waypoint is automatically removed once that time passes. 適用於臨時標記，例如集合點、危險區域或會面地點。

已到期的航點將自動從地圖上隱藏，以避免畫面雜亂。 The expiration countdown is based on the absolute time you picked, not a duration from when the waypoint was created or received.

Waypoint Geofences

Any waypoint can also define a geofence — an alert area — so you or others get notified when a node enters or leaves it:

Set a geofence radius from the preset chips (or Off to disable), or tap Set area on map to draw a custom rectangular area instead.
Once a region is set, toggle Notify on enter and/or Notify on exit.
Optionally enable Favorites only to limit alerts to your favorited nodes.

Since waypoints (and their geofences) are broadcast to the whole mesh, only the creator is alerted by default. If someone else shares a geofenced waypoint with you, its detail view offers a “Notify me of crossings” opt-in so you can also receive enter/exit alerts for it.

管理航點

點選地圖上的航點，可檢視其詳細資訊與座標
編輯或刪除您建立的航點
已鎖定的航點無法被其他節點修改或刪除 — 僅原始建立者可進行變更
未鎖定的航點可由任何 mesh 成員編輯

地圖圖層

Tap the layers icon on the map to open Manage Map Layers, where you can import your own overlays in .kml, .kmz, or GeoJSON format — either by opening a file with Meshtastic or sharing it into the app from another app. Imported layers are listed with a toggle to show/hide each one and an option to remove it. This is available on both the Google Play and F-Droid builds.

Site Planner

Site Planner estimates RF coverage for a transmitter and draws it on the map as a color-coded overlay. Open it from a map control, or from a node’s detail page via Estimate coverage (shown only for nodes with a known position). Configure the transmitter (location, frequency, TX power, antenna gain and height), the receiver (sensitivity, height), and simulation options (max range, high-resolution terrain, color palette), then run the estimate. Like map layers, Site Planner works on both the Google Play and F-Droid builds.

位置分享

啟用位置分享

您的節點依據以下方式分享 GPS 位置：

固定間隔 — 依固定時間間隔廣播位置
智慧位置 — 移動距離超過閾值時才廣播位置
手動 — 僅在明確要求時才分享位置

請在「設定 → 位置」中設定位置行為。

隱私注意事項

🔒 隱私：位置資料將廣播至您頻道上的所有節點。若不想分享您的位置，請在設定中停用 GPS 定位，或使用固定／假位置。

地圖來源

The base map depends on your app flavor: Google Play builds use Google Maps, while F-Droid and Desktop builds use OpenStreetMap. On top of the base map, additional tile sources are available as overlays or alternatives:

衛星影像（視可用性而定）
離線圖磚（下載地圖區域以供離線使用）